Show me how you would check that the direction indicators are working.
Applying the indicators or hazard warning switch and walk round car to check that all the indicators are functioning.
Show me how you would check that the brake lights are working on this car.
Press the brake pedal, make use of reflections, or ask someone to help you.
Show me how you would check that the power assisted steering is working before starting a journey.
If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
Show me how you would check the parking brake (handbrake) for excessive wear, make sure you keep safe control of the vehicle.
Apply foot brake. Demonstrate by applying parking handbrake so that when it is fully applied it secures itself, and is not at the end of the working travel.
Show me how you would check that the horn is working (off road only).
Check is carried out by using control, normally centre of steering wheel.
Show me how you would clean the windscreen using the windscreen washer and wipers.
Operate control to wash and wipe windscreen (turn ignition on if necessary).
Show me how you would set the demister controls to clear all the windows effectively, include front and rear screens effectively.
Set relevant controls including; fan, temperature, air direction & source and heated screen to clear windscreen and windows.
Show me how you would switch on the rear fog lights & explain when you would use them.
Turn on dipped headlights and ignition. Switch on rear fog lights and check warning light is on. Use when visibility less than 100 metres. Turn off when visibility improves.
Show me how you switch your headlights from dipped to main beam and how you would know the main beam is on whilst inside the car.
Operate switch (with ignition or engine on if necessary), check with main beam warning light.
Links